Insect pests and plant diseases are two of the main reasons crops lose growth and yield. An insect pest is an insect that harms a crop by feeding on it, damaging its parts, or spreading disease. A plant disease is a harmful change in a plant caused by a living organism or by unfavourable conditions. For entrance exams, this topic is important because questions test whether you can tell pest types apart, recognise disease types, and apply the idea of integrated pest management, usually called IPM, to a given situation.

Do not try to memorise long lists of pests and diseases. Focus on the basic ideas: how a pest feeds, how a disease spreads, and why a single control method is rarely enough. This page explains those ideas in simple language and gives a short practice routine. Use it with agriculture MCQs and mock test series questions to build speed and accuracy.

Key Concepts to Know

Insect Pests in General Terms

Insect pests are often grouped by how they feed and damage the plant. Chewing pests eat leaves, stems, or other plant parts, leaving holes or cut edges. Sucking pests pierce plant tissue and suck the sap, which weakens the plant and may cause curling or yellowing. Boring pests enter stems, fruits, or roots and feed inside, so the damage may not be visible from outside at first. Some pests also act as carriers, spreading disease organisms from one plant to another while they feed. Questions often describe the damage in words, so learn to link the damage pattern with the feeding type.

The life stages of an insect also matter. Some pests damage the crop mainly as larvae, while others damage it as adults. Regular field inspection, looking at leaves, stems, and fruits, is therefore a basic part of pest management.

Plant Diseases in General Terms

Plant diseases are commonly grouped by their cause. Fungal diseases are caused by fungi and often appear as spots, mould-like growth, or rotting of plant parts. Bacterial diseases are caused by bacteria and may cause spots, wilting, or soft rotting. Viral diseases are caused by viruses and often cause mosaic-like patterns, yellowing, curling, or stunted growth. Some plant problems are not caused by living organisms at all. They result from a shortage or excess of water or nutrients, extreme weather, or other environmental stress. MCQs often ask you to separate living causes from non-living causes, so keep this distinction clear.

Diseases spread in different ways. Some spread through infected seed or planting material, some through soil or water, some through air, and some through insect carriers. Healthy seed, clean planting material, and good field hygiene therefore reduce many disease problems before they start. A diseased plant should not be treated in the same way as a pest attack: removing and destroying badly affected plants can stop spread, while the wrong chemical may do nothing if the cause is not understood.

Integrated Pest Management

Integrated pest management, or IPM, means combining several control methods in a planned way so that pests are kept below a level that causes serious loss, with the least harm to people, useful organisms, and the environment. IPM does not mean using no chemicals at all. It means using chemicals only when needed, and only after other methods have been considered. The goal is control, not complete eradication, because eradication is often impossible and unnecessary.

IPM has four main components. Cultural control includes practices such as crop rotation, timely sowing, healthy seed, proper spacing, and removal of crop remains that shelter pests. Mechanical control includes hand picking, traps, barriers, and removing affected plant parts. Biological control uses natural enemies, such as predators and parasites, that attack pests without harming the crop. Chemical control uses pesticides, but in IPM they are chosen carefully, used at the right stage, and treated as a last resort rather than the first response. A question may ask which component a given practice belongs to, so learn one clear example for each component.

Likely Question Types

Questions on this topic often describe damage or symptoms and ask for the pest type, disease type, or cause. Others give a farming practice and ask which IPM component it belongs to. Some ask for the correct order of IPM steps, or for the best first action in a situation. Definition questions are also common, especially for IPM and for terms such as predator, parasite, and carrier. This topic appears often, so learn the feeding types, disease groups, and IPM components as one connected set rather than as separate facts.

Common Traps and Mistakes

The biggest trap is jumping straight to chemical control in every answer. In IPM questions, the correct answer is often a preventive or non-chemical step, especially when the question asks for the first step or the safest approach. Another trap is confusing disease causes: fungal, bacterial, and viral diseases have different signs and different control logic, so do not treat them as one group. Students also confuse predators and parasites, and mix up chewing and sucking damage. Read the damage description word by word before choosing.

A Practice Routine

Make a one-page chart with three columns: pest feeding types with their damage signs, disease groups with their causes and general signs, and IPM components with one example each. Revise this chart daily for a week, and add only the points you keep forgetting. Then practise mixed questions and note every error in one line: what you chose, what was correct, and why. Use previous papers to see how symptoms are described, and check the exam pattern so your practice matches the real test format.

In the second week, mix pest and disease questions with other crop protection topics. Before a test, revise only your chart and error list. That keeps revision short and focused, and it stops last-minute guessing from replacing the concepts you have already learned.

FAQs

What is the difference between a chewing pest and a sucking pest?

A chewing pest eats plant parts, leaving holes or cut edges. A sucking pest pierces plant tissue and sucks sap, which weakens the plant and may cause curling or yellowing without obvious holes.

What are the main types of plant diseases?

Diseases are grouped by cause into fungal, bacterial, and viral diseases. Some plant problems are non-living in origin, caused by water, nutrient, or weather stress rather than by an organism.

What is integrated pest management?

IPM is a planned combination of cultural, mechanical, biological, and chemical methods that keeps pests below a level causing serious loss, with the least harm to people, useful organisms, and the environment.

Does IPM mean no pesticides at all?

No. IPM uses pesticides carefully and only when needed, after other methods have been considered. Chemicals are a last resort in IPM, not the first or only response.

Why is early detection of pests important?

Early detection allows action before the pest population grows large. Regular field inspection helps a farmer act at the right stage, when control is easier and damage is still limited.

Is page par Insect Pests, Diseases and IPM ke 5 sabse important mini topics diye hain. Har topic ke saath ek ASLI PYQ (year ke saath) diya hai, taaki aapko pata chale ki exam me is topic se asal me sawal aata hai. Neeche 10 aur practice MCQ bhi hain.

Topic 1 — IPM and Economic Threshold Level (ETL)

IPM (Integrated Pest Management) ka matlab hai — pest ko sirf zehar se nahi, balki sab tareekon (cultural, mechanical, biological aur zarurat par chemical) ko mila kar control karna. Iska sabse important concept hai Economic Threshold Level (ETL) — ye pest ki wo ghanatva (population) hai jahan control shuru kar dena chahiye, taaki pest economic nuksaan wale star tak na pahunche. ETL hamesha pest control / pest management se juda hota hai.

  • ETL — Economic Threshold Level, pest control se sambandhit
  • ETL par pahunchte hi control measures shuru karne chahiye
  • IPM me chemical control sabse aakhri upaay hota hai
  • ETL ka maksad — bekaar ke spray bachana aur sahi samay par control
ā˜… Asli PYQ — Exam Me Poochha Gaya Sawal

The economic threshold level is associated with:

A) Irrigation
B) Pest control
C) Harvesting
D) Storage

Answer: (b) Pest control

ā˜… PYQ 2016 • CCS HAU 10th-Base Entrance Exam

Topic 2 — Biological Control: Ladybird Beetle and Trichogramma

Jab pest ko uske natural dushman (predator ya parasite) se control kiya jata hai, to use biological control kehte hain — ye shabd H.S. Smith ne 1919 me diya tha. Iska sabse mashhoor example hai ladybird beetle, jo aphids (chepa) ko kha kar unhe control karta hai. Isi tarah Trichogramma ek chhota sa egg parasitoid hai jo bollworms ke andon me apne ande deta hai, aur Trichoderma viride ek useful fungus hai jo disease-causing fungi ko rokta hai.

  • Ladybird beetle — aphids ka natural predator (biological control agent)
  • Trichogramma — egg parasitoid, biological control agent
  • Trichoderma viride — bio-control fungus
  • ‘Biological control’ term — H.S. Smith (1919)
ā˜… Asli PYQ — Exam Me Poochha Gaya Sawal

Which insect is useful in biological control of aphids?

A) Whitefly
B) Ladybird beetle
C) Grasshopper
D) Termite

Answer: (b) Ladybird beetle

ā˜… PYQ 2017 • CCS HAU 10th-Base Entrance Exam

Topic 3 — Red Rot of Sugarcane and Disease Groups

Har bimari kisi na kisi karak (causal organism) se hoti hai, aur exam me bimari ko uske karak se milana hi sabse aam sawal hai. Red rot ganne (sugarcane) ki sabse khatarnak fungal bimari hai — isme ganne ka andar ka hissa laal ho jata hai. Isi tarah rice ki blast bhi fungus se, citrus canker bacteria se, aur tobacco mosaic virus se hota hai. Ye chaar naam-kaarak jodiyan har saal kisi na kisi form me aati hain.

  • Red rot — sugarcane ki fungal disease
  • Blast — rice ki fungal disease
  • Citrus canker — bacterial disease
  • Tobacco mosaic — viral disease
ā˜… Asli PYQ — Exam Me Poochha Gaya Sawal

The disease “red rot” affects:

A) Rice
B) Cotton
C) Sugarcane
D) Wheat

Answer: (c) Sugarcane

ā˜… PYQ 2016 • CCS HAU 10th-Base Entrance Exam

Topic 4 — Stored Grain Pests: Rice Weevil

Katai ke baad bhi pest nuksaan band nahi karte — godam (storage) me bhi keede anaaj ko khaate hain. In stored grain pests me sabse mashhoor hai rice weevil, jo chawal aur dusre anaaj ke danon ko andar se khokhla kar deta hai. Rice weevil beetle group ka keeda hai, isliye ye Coleoptera order me aata hai. Godaam ke keedo ko control karne ke liye fumigation (jaise methyl bromide jaise gaseous fumigant) ka use hota hai.

  • Rice weevil — stored grains ka major pest
  • Rice weevil ka order — Coleoptera (beetles)
  • Red flour beetle bhi ek stored grain pest hai
  • Fumigation — godam ke pest control ka tareeka (gaseous fumigant)
ā˜… Asli PYQ — Exam Me Poochha Gaya Sawal

Which insect pest attacks stored grains?

A) Rice weevil
B) Stem borer
C) Bollworm
D) Aphid

Answer: (a) Rice weevil

ā˜… PYQ 2016 • CCS HAU 10th-Base Entrance Exam

Topic 5 — Insect Orders: Aphids Belong to Hemiptera

Keedo ko unki banawat ke hisaab se orders me baanta gaya hai, aur ye classification exam ki pasandeeda topic hai. Aphids (chepa), jassids aur bugs sucking pests hain — ye sab Hemiptera order me aate hain. Butterflies, moths aur bollworms Lepidoptera me, beetles aur weevils Coleoptera me, aur asli makkhiyan (house fly, fruit fly) Diptera me aati hain. Makdi (spiders) aur mites keede nahi hain — ye Arachnida class me aate hain.

  • Aphids, jassids, bugs — Hemiptera
  • Butterfly, moth, bollworm — Lepidoptera
  • Beetles, weevils — Coleoptera
  • House fly, fruit fly — Diptera; spiders/mites — Arachnida (insects nahi)
ā˜… Asli PYQ — Exam Me Poochha Gaya Sawal

Aphids belong to the order…..

(a) Lepidoptera
(b) Orthoptera
(c) Hemiptera
(d) Hymenoptera

Answer: (c) Hemiptera

ā˜… PYQ 2019 • CCS HAU 10th-Base Entrance Exam

Practice MCQs — Apne Aap Ko Test Karein

1. IPM stands for:

(a) Integrated Pest Management   (b) Indian Pest Mission   (c) Internal Plant Method   (d) Insect Pest Method

2. Trichogramma is a:

(a) Fungicide   (b) Egg parasitoid   (c) Herbicide   (d) Fertilizer

3. Blast disease commonly affects which crop?

(a) Rice   (b) Cotton   (c) Gram   (d) Mustard

4. Citrus canker is caused by:

(a) Fungus   (b) Virus   (c) Bacteria   (d) Nematode

5. Rice weevil belongs to the order:

(a) Diptera   (b) Coleoptera   (c) Lepidoptera   (d) Hemiptera

6. Which of the following is a gaseous fumigant used in storage?

(a) Methyl Bromide   (b) Urea   (c) DAP   (d) Gypsum

7. Thiram is commonly used as a:

(a) Seed dresser   (b) Fertilizer   (c) Growth promoter   (d) Spray oil

8. Tobacco mosaic disease is caused by:

(a) Bacteria   (b) Fungus   (c) Virus   (d) Phytoplasma

9. The most damaging stage of a caterpillar pest is generally the:

(a) Egg   (b) Larva   (c) Pupa   (d) Adult

10. Neem-based insecticides are examples of:

(a) Synthetic insecticides   (b) Fumigants only   (c) Heavy metals   (d) Natural (botanical) insecticides

Answer Key — Practice MCQs

1-(a)   2-(b)   3-(a)   4-(c)   5-(b)   6-(a)   7-(a)   8-(c)   9-(b)   10-(d)

WhatsApp